Floor tiles are a great way to add style and personality to your home. But before you start tiling, there are a few things you need to know to do the job right. 

When installed correctly, they can last for many years and withstand a lot of wear and tear. However, if you don’t take the time to install them properly, you could end up with cracked and chipped tiles that need to be replaced much sooner than you’d like.

Here’s a quick guide to doing floor tiling the right way.

1. Choose The Right Tile. 

There are many different types of floor tiles on the market, so it’s important to choose one that’s right for your needs. Consider factors like durability, slip resistance, and aesthetics when making your selection.

It’s important to choose a tile that will stand up to the traffic in your home. If you’re not sure which tile is right for your needs, ask a sales associate at your local home improvement store for advice.

2. Consider the Size Of Your Room And The Shape Of Your Floor.

You also need to take into account the size of your room and the shape of your floor. Once you have these two factors sorted out, you can begin preparing your floor for tiling.

3. Prepare The Surface. 

Once you’ve selected your tile, it’s time to prepare the surface where you’ll be installing it. This involves cleaning the area thoroughly and making sure it’s free of debris or anything else that could potentially interfere with the tile adhesive.

If there are any bumps or irregularities on the surface, you’ll need to fix them before proceeding. Once the surface is prepped, lay down a layer of mortar or self-levelling compound to create an even foundation for your tile.

4. Follow The Pattern. 

When you’re ready to start tiling, it’s important to follow the pattern that you’ve chosen. This will ensure that your tiles are evenly spaced and look their best when they’re finished. Don’t be afraid to use a level or tape measure to make sure everything is lined up correctly.

5. Apply The Adhesive. 

Once the surface is prepared, it’s time to apply the tile adhesive. Be sure to follow the manufacturer’s instructions carefully to ensure proper bonding. Make sure to spread the adhesive evenly over the entire back of the tile-this will help with adhesion and prevent uneven spots.

Be careful not to get any adhesive on the face of the tile as this can be difficult to remove later. Wait until the adhesive has set before grouting or else you risk having your tiles come loose.

6. Install The Tiles. 

Once the adhesive is in place, it’s time to start installing the tiles. Start in one corner and work your way out, making sure each tile is properly aligned as you go.

7. Grout The Joints. 

After all of the tiles are in place, it’s time to fill in the joints between them with grout. Use a wet sponge to remove any excess grout before it dries.

8. Seal The Tile. 

Finally, once the grout is dry, it’s time to seal the tile. This will help protect it from stains and other damage.

Following these simple steps will help you achieve professional-looking results when tiling your floor. Just take your time and be careful, and you’ll be happy with it. With a little bit of planning and attention to detail, you can install beautiful floors that will last for years to come.

If you’re not up for the challenge of doing it yourself, hire a professional flooring contractor to do the job for you. They have the experience and expertise to get the job done right, and they can save you a lot of time and hassle in the process.

If you want to know the average cost of tiling per square metre, just click it. 

Leave a Comment on Doing Floor Tiling The Right Way

Leave a Reply

Your email address will not be published. Required fields are marked *